[omniORB] CSIv2 support

[Keith Chalk]

Hi,

I've seen a post from Duncan in 2003 saying that CSI v2 was not
supported by omniORB; is this still the case or has any CSI v2 support
been added since then? We need to use CSI v2 now and I need to know if
4.1.1 supports this, or will I need to change ORBs? I can't find
anything definitive one way or the other.

Thanks,
Keith.

********************************************************************************
This email is intended only for the person(s) named above and may contain private and confidential information. If it has come to you in error, please destroy and permanently delete any copy in your possession and contact us on [phone]. The information in this email is copyright ? CDL Group Holdings Limited. We cannot accept any liability for any loss or damage sustained as a result of software viruses. It is your responsibility to carry out such virus checking as is necessary before opening any attachment.

Cheshire Datasystems Limited uses software which automatically screens incoming emails for inappropriate content and attachments. If the software identifies such content or attachment, the email will be forwarded to our Technology Department for checking. You should be aware that any email which you send to Cheshire Datasystems Limited is subject to this procedure.

Cheshire Datasystems Limited, Strata House, Kings Reach Road, Stockport SK4 2HD
Registered in England and Wales with Company Number 3991057
VAT registration : 727 1188 33
******************************************************************************

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.omniorb-support.com/pipermail/omniorb-list/attachments/20080212/6d8548ba/attachment.htm

[Sander Steffann]

Hi Keith,
I've seen a post from Duncan in 2003 saying that CSI v2 was not supported by omniORB; is this still the case or has any CSI v2 support been added since then? We need to use CSI v2 now and I need to know if 4.1.1 supports this, or will I need to change ORBs? I can't find anything definitive one way or the other.
I have been working on CSIv2 support for OmniORB in the past, but I never got further than some testing before it became a low priority for the company. As far as I know there is no support for CSIv2.

- Sander
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.omniorb-support.com/pipermail/omniorb-list/attachments/20080212/514916e8/attachment.htm

[Duncan Grisby]

Post by Keith Chalk
I've seen a post from Duncan in 2003 saying that CSI v2 was not
supported by omniORB; is this still the case or has any CSI v2 support
been added since then? We need to use CSI v2 now and I need to know if
4.1.1 supports this, or will I need to change ORBs? I can't find
anything definitive one way or the other.

No, omniORB does not support CSIv2 at present. In 4.1.2 (to be released
imminently) there is a really minimal subset of CSIv2 to allow IORs to
contain more than one SSL endpoint, but that's the extent of the
support.

Duncan.