[omniORB] omniORB: The omniDynamic library is not linked.

[Kai Chen]

Hi,I have installed the ominORB3.05 in suse 7. And ?run the etho example in the same host?successfully. But failed among two hosts.the server is in 192.168.3.103 ,the clent is in 192.168.3.104,the OS are all suse 7.The network is good.?
first I start the server in 192.168.3.103:***@linux:~/omni/src/examples/echo> ./eg2_impl'IOR:010000000d00000049444c3a4563686f3a312e3000000000010000000000000026000000010100000a0000003132372e302e302e3100b8a20e000000fef528834b0000232a0000000000'
then I start clent in 192.168.3.104:***@linux:/usr/local/OmniOrb305/src/examples/echo> ./eg2_clt 'IOR:010000000d00000049444c3a4563686f3a312e3000000000010000000000000026000000010100000a0000003132372e302e302e3100b8a20e000000fef528834b0000232a0000000000' -ORBtraceLevel 25omniORB: strand Ripper: start.omniORB: scavenger : start.omniORB: gateKeeper is tcpwrapGK 1.0 - based on tcp_wrappers_7.6omniORB: strand Rope::incrRefCount: old value = 0omniORB: Creating ref to remote: key<0x494e4954>?target id ? ? ?: IDL:omg.org/CORBA/Object:1.0?most derived id: omg.org/CORBA/InitialReferences:1.0omniORB: The omniDynamic library is not linked.omniORB: strand Rope::incrRefCount: old value = 0omniORB: Creating ref to remote: root<0>?target id ? ? ?: IDL:omg.org/CORBA/Object:1.0?most derived id: IDL:Echo:1.0omniORB: LocateRequest to remote: root<0>omniORB: throw omniConnectionBroken (minor 111) from tcpSocketMTfactory.cc:1168omniORB: tcpSocketStrand::~Strand() close
socket no. 5omniORB: throw COMM_FAILURE from remoteIdentity.cc:249omniORB: omniRemoteIdentity deleted.omniORB: strand Rope::decrRefCount: old value = 1omniORB: ObjRef(IDL:Echo:1.0) -- deleted.Caught system exception COMM_FAILURE -- unable to contact the object.
Thank you.



___________________________________________________________
?????????????????
http://card.mail.cn.yahoo.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.omniorb-support.com/pipermail/omniorb-list/attachments/20100224/72152470/attachment.htm

[Kai Chen]

And this is the clent output when using the?-ORBtraceLevel 40:
***@linux:/usr/local/OmniOrb305/src/examples/echo> ./eg2_clt 'IOR:010000000d00000049444c3a4563686f3a312e3000000000010000000000000026000000010100000a0000003132372e302e302e3100b8a20e000000fef528834b0000232a0000000000' -ORBtraceLevel 40omniORB: strand Ripper: start.omniORB: gateKeeper is tcpwrapGK 1.0 - based on tcp_wrappers_7.6omniORB: strand Rope::incrRefCount: old value = 0omniORB: Creating ref to remote: key<0x494e4954>?target id ? ? ?: IDL:omg.org/CORBA/Object:1.0?most derived id: omg.org/CORBA/InitialReferences:1.0omniORB: The omniDynamic library is not linked.omniORB: strand Rope::incrRefCount: old value = 0omniORB: Creating ref to remote: root<0>?target id ? ? ?: IDL:omg.org/CORBA/Object:1.0?most derived id: IDL:Echo:1.0omniORB: LocateRequest to remote: root<0>ll_send: 34 bytes4749 4f50 0100 0103 1600 0000 0100 0000 GIOP............0e00 0000 fef5 2883 4b00 0023 2a00 0000 ......(.K..#*...0000 ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?
?..omniORB: throw omniConnectionBroken (minor 111) from tcpSocketMTfactory.cc:1168omniORB: tcpSocketStrand::~Strand() close socket no. 5omniORB: throw COMM_FAILURE from remoteIdentity.cc:249omniORB: omniRemoteIdentity deleted.omniORB: strand Rope::decrRefCount: old value = 1omniORB: ObjRef(IDL:Echo:1.0) -- deleted.Caught system exception COMM_FAILURE -- unable to contact the object.
--- 10?2?24????, Kai Chen <***@yahoo.cn> ???

???: Kai Chen <***@yahoo.cn>
??: [omniORB] omniORB: The omniDynamic library is not linked.
???: omniorb-***@omniorb-support.com
??: 2010?2?24?,??,??5:09

Hi,I have installed the ominORB3.05 in suse 7. And ?run the etho example in the same host?successfully. But failed among two hosts.the server is in 192.168.3.103 ,the clent is in 192.168.3.104,the OS are all suse 7.The network is good.?
first I start the server in 192.168.3.103:***@linux:~/omni/src/examples/echo> ./eg2_impl'IOR:010000000d00000049444c3a4563686f3a312e3000000000010000000000000026000000010100000a0000003132372e302e302e3100b8a20e000000fef528834b0000232a0000000000'
then I start clent in 192.168.3.104:***@linux:/usr/local/OmniOrb305/src/examples/echo> ./eg2_clt 'IOR:010000000d00000049444c3a4563686f3a312e3000000000010000000000000026000000010100000a0000003132372e302e302e3100b8a20e000000fef528834b0000232a0000000000'
-ORBtraceLevel 25omniORB: strand Ripper: start.omniORB: scavenger : start.omniORB: gateKeeper is tcpwrapGK 1.0 - based on tcp_wrappers_7.6omniORB: strand Rope::incrRefCount: old value = 0omniORB: Creating ref to remote: key<0x494e4954>?target id ? ? ?: IDL:omg.org/CORBA/Object:1.0?most derived id: omg.org/CORBA/InitialReferences:1.0omniORB: The omniDynamic library is not linked.omniORB: strand Rope::incrRefCount: old value = 0omniORB: Creating ref to remote: root<0>?target id ? ? ?: IDL:omg.org/CORBA/Object:1.0?most derived id: IDL:Echo:1.0omniORB: LocateRequest to remote: root<0>omniORB: throw omniConnectionBroken (minor 111) from tcpSocketMTfactory.cc:1168omniORB: tcpSocketStrand::~Strand() close socket no.
5omniORB: throw COMM_FAILURE from remoteIdentity.cc:249omniORB: omniRemoteIdentity deleted.omniORB: strand Rope::decrRefCount: old value = 1omniORB: ObjRef(IDL:Echo:1.0) -- deleted.Caught system exception COMM_FAILURE -- unable to contact the object.
Thank you.




?????????????????
-----???????-----

_______________________________________________
omniORB-list mailing list
omniORB-***@omniorb-support.com
http://www.omniorb-support.com/mailman/listinfo/omniorb-list



___________________________________________________________
?????????????????
http://card.mail.cn.yahoo.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.omniorb-support.com/pipermail/omniorb-list/attachments/20100224/71b94086/attachment.htm

[Duncan Grisby]

Hi, I have installed the ominORB3.05 in suse 7. And run the etho
example in the same host successfully. But failed among two hosts. the
server is in 192.168.3.103 ,the clent is in 192.168.3.104,the OS are
all suse 7.The network is good.

Why are you using such an ancient omniORB version? 3.0.5 was released
eight years ago.

The problem you are seeing is that the server thinks its IP address is
127.0.0.1. You can either try to reconfigure things so that it works
with your archaeological version of omniORB, or you can use a recent
omniORB version where you won't have a problem.

Duncan.

[Duncan Grisby]

Spam detection software, running on the system "severka.jeef.sk", has
identified this incoming email as possible spam. The original message
has been attached to this so you can view it (if it isn't spam) or label
similar future email. If you have any questions, see
***@jeef.info for details.

Content preview: On Wed, 2010-02-24 at 01:09 -0800, Kai Chen wrote: > Hi, I
have installed the ominORB3.05 in suse 7. And run the etho > example in the
same host successfully. But failed among two hosts. the > server is in 192.168.3.103
,the clent is in 192.168.3.104,the OS are > all suse 7.The network is good.
[...]

Content analysis details: (7.6 points, 6.0 required)

pts rule name description
---- ---------------------- --------------------------------------------------
0.9 RCVD_IN_PBL RBL: Received via a relay in Spamhaus PBL
[213.106.83.213 listed in zen.spamhaus.org]
0.9 RCVD_IN_SORBS_DUL RBL: SORBS: sent directly from dynamic IP address
[213.106.83.213 listed in dnsbl.sorbs.net]
4.3 HELO_DYNAMIC_HCC Relay HELO'd using suspicious hostname (HCC)
1.4 HELO_DYNAMIC_DHCP Relay HELO'd using suspicious hostname (DHCP)
0.0 BAYES_50 BODY: Bayesian spam probability is 40 to 60%
[score: 0.4994]
0.1 RDNS_DYNAMIC Delivered to trusted network by host with
dynamic-looking rDNS


-------------- next part --------------
An embedded message was scrubbed...
From: Duncan Grisby <***@grisby.org>
Subject: Re: [omniORB] omniORB: The omniDynamic library is not linked.
Date: Wed, 24 Feb 2010 14:46:23 +0000
Size: 3459
Url: http://www.omniorb-support.com/pipermail/omniorb-list/attachments/20100224/ec0a7c9c/attachment.eml

[Duncan Grisby]

Spam detection software, running on the system "severka.jeef.sk", has
identified this incoming email as possible spam. The original message
has been attached to this so you can view it (if it isn't spam) or label
similar future email. If you have any questions, see
***@jeef.info for details.

Content preview: On Wed, 2010-02-24 at 01:09 -0800, Kai Chen wrote: > Hi, I
have installed the ominORB3.05 in suse 7. And run the etho > example in the
same host successfully. But failed among two hosts. the > server is in 192.168.3.103
,the clent is in 192.168.3.104,the OS are > all suse 7.The network is good.
[...]

Content analysis details: (7.6 points, 6.0 required)

pts rule name description
---- ---------------------- --------------------------------------------------
0.9 RCVD_IN_PBL RBL: Received via a relay in Spamhaus PBL
[213.106.83.213 listed in zen.spamhaus.org]
0.9 RCVD_IN_SORBS_DUL RBL: SORBS: sent directly from dynamic IP address
[213.106.83.213 listed in dnsbl.sorbs.net]
4.3 HELO_DYNAMIC_HCC Relay HELO'd using suspicious hostname (HCC)
1.4 HELO_DYNAMIC_DHCP Relay HELO'd using suspicious hostname (DHCP)
0.0 BAYES_50 BODY: Bayesian spam probability is 40 to 60%
[score: 0.4994]
0.1 RDNS_DYNAMIC Delivered to trusted network by host with
dynamic-looking rDNS


-------------- next part --------------
An embedded message was scrubbed...
From: Duncan Grisby <***@grisby.org>
Subject: Re: [omniORB] omniORB: The omniDynamic library is not linked.
Date: Wed, 24 Feb 2010 14:46:23 +0000
Size: 3459
Url: http://www.omniorb-support.com/pipermail/omniorb-list/attachments/20100224/ec0a7c9c/attachment-0001.eml

[Duncan Grisby]

Spam detection software, running on the system "severka.jeef.sk", has
identified this incoming email as possible spam. The original message
has been attached to this so you can view it (if it isn't spam) or label
similar future email. If you have any questions, see
***@jeef.info for details.

Content preview: On Wed, 2010-02-24 at 01:09 -0800, Kai Chen wrote: > Hi, I
have installed the ominORB3.05 in suse 7. And run the etho > example in the
same host successfully. But failed among two hosts. the > server is in 192.168.3.103
,the clent is in 192.168.3.104,the OS are > all suse 7.The network is good.
[...]

Content analysis details: (7.6 points, 6.0 required)

pts rule name description
---- ---------------------- --------------------------------------------------
0.9 RCVD_IN_PBL RBL: Received via a relay in Spamhaus PBL
[213.106.83.213 listed in zen.spamhaus.org]
0.9 RCVD_IN_SORBS_DUL RBL: SORBS: sent directly from dynamic IP address
[213.106.83.213 listed in dnsbl.sorbs.net]
4.3 HELO_DYNAMIC_HCC Relay HELO'd using suspicious hostname (HCC)
1.4 HELO_DYNAMIC_DHCP Relay HELO'd using suspicious hostname (DHCP)
0.0 BAYES_50 BODY: Bayesian spam probability is 40 to 60%
[score: 0.4994]
0.1 RDNS_DYNAMIC Delivered to trusted network by host with
dynamic-looking rDNS


-------------- next part --------------
An embedded message was scrubbed...
From: Duncan Grisby <***@grisby.org>
Subject: Re: [omniORB] omniORB: The omniDynamic library is not linked.
Date: Wed, 24 Feb 2010 14:46:23 +0000
Size: 3459
Url: http://www.omniorb-support.com/pipermail/omniorb-list/attachments/20100224/ec0a7c9c/attachment-0005.eml

[Duncan Grisby]

Spam detection software, running on the system "severka.jeef.sk", has
identified this incoming email as possible spam. The original message
has been attached to this so you can view it (if it isn't spam) or label
similar future email. If you have any questions, see
***@jeef.info for details.

Content preview: On Wed, 2010-02-24 at 01:09 -0800, Kai Chen wrote: > Hi, I
have installed the ominORB3.05 in suse 7. And run the etho > example in the
same host successfully. But failed among two hosts. the > server is in 192.168.3.103
,the clent is in 192.168.3.104,the OS are > all suse 7.The network is good.
[...]

Content analysis details: (7.6 points, 6.0 required)

pts rule name description
---- ---------------------- --------------------------------------------------
0.9 RCVD_IN_PBL RBL: Received via a relay in Spamhaus PBL
[213.106.83.213 listed in zen.spamhaus.org]
0.9 RCVD_IN_SORBS_DUL RBL: SORBS: sent directly from dynamic IP address
[213.106.83.213 listed in dnsbl.sorbs.net]
4.3 HELO_DYNAMIC_HCC Relay HELO'd using suspicious hostname (HCC)
1.4 HELO_DYNAMIC_DHCP Relay HELO'd using suspicious hostname (DHCP)
0.0 BAYES_50 BODY: Bayesian spam probability is 40 to 60%
[score: 0.4994]
0.1 RDNS_DYNAMIC Delivered to trusted network by host with
dynamic-looking rDNS


-------------- next part --------------
An embedded message was scrubbed...
From: Duncan Grisby <***@grisby.org>
Subject: Re: [omniORB] omniORB: The omniDynamic library is not linked.
Date: Wed, 24 Feb 2010 14:46:23 +0000
Size: 3459
Url: http://www.omniorb-support.com/pipermail/omniorb-list/attachments/20100224/ec0a7c9c/attachment-0006.eml

[Duncan Grisby]

Spam detection software, running on the system "severka.jeef.sk", has
identified this incoming email as possible spam. The original message
has been attached to this so you can view it (if it isn't spam) or label
similar future email. If you have any questions, see
***@jeef.info for details.

Content preview: On Wed, 2010-02-24 at 01:09 -0800, Kai Chen wrote: > Hi, I
have installed the ominORB3.05 in suse 7. And run the etho > example in the
same host successfully. But failed among two hosts. the > server is in 192.168.3.103
,the clent is in 192.168.3.104,the OS are > all suse 7.The network is good.
[...]

Content analysis details: (7.6 points, 6.0 required)

pts rule name description
---- ---------------------- --------------------------------------------------
0.9 RCVD_IN_PBL RBL: Received via a relay in Spamhaus PBL
[213.106.83.213 listed in zen.spamhaus.org]
0.9 RCVD_IN_SORBS_DUL RBL: SORBS: sent directly from dynamic IP address
[213.106.83.213 listed in dnsbl.sorbs.net]
4.3 HELO_DYNAMIC_HCC Relay HELO'd using suspicious hostname (HCC)
1.4 HELO_DYNAMIC_DHCP Relay HELO'd using suspicious hostname (DHCP)
0.0 BAYES_50 BODY: Bayesian spam probability is 40 to 60%
[score: 0.4994]
0.1 RDNS_DYNAMIC Delivered to trusted network by host with
dynamic-looking rDNS


-------------- next part --------------
An embedded message was scrubbed...
From: Duncan Grisby <***@grisby.org>
Subject: Re: [omniORB] omniORB: The omniDynamic library is not linked.
Date: Wed, 24 Feb 2010 14:46:23 +0000
Size: 3459
Url: http://www.omniorb-support.com/pipermail/omniorb-list/attachments/20100224/ec0a7c9c/attachment-0007.eml

[Duncan Grisby]

Spam detection software, running on the system "severka.jeef.sk", has
identified this incoming email as possible spam. The original message
has been attached to this so you can view it (if it isn't spam) or label
similar future email. If you have any questions, see
***@jeef.info for details.

Content preview: On Wed, 2010-02-24 at 01:09 -0800, Kai Chen wrote: > Hi, I
have installed the ominORB3.05 in suse 7. And run the etho > example in the
same host successfully. But failed among two hosts. the > server is in 192.168.3.103
,the clent is in 192.168.3.104,the OS are > all suse 7.The network is good.
[...]

Content analysis details: (7.6 points, 6.0 required)

pts rule name description
---- ---------------------- --------------------------------------------------
0.9 RCVD_IN_PBL RBL: Received via a relay in Spamhaus PBL
[213.106.83.213 listed in zen.spamhaus.org]
0.9 RCVD_IN_SORBS_DUL RBL: SORBS: sent directly from dynamic IP address
[213.106.83.213 listed in dnsbl.sorbs.net]
4.3 HELO_DYNAMIC_HCC Relay HELO'd using suspicious hostname (HCC)
1.4 HELO_DYNAMIC_DHCP Relay HELO'd using suspicious hostname (DHCP)
0.0 BAYES_50 BODY: Bayesian spam probability is 40 to 60%
[score: 0.4994]
0.1 RDNS_DYNAMIC Delivered to trusted network by host with
dynamic-looking rDNS


-------------- next part --------------
An embedded message was scrubbed...
From: Duncan Grisby <***@grisby.org>
Subject: Re: [omniORB] omniORB: The omniDynamic library is not linked.
Date: Wed, 24 Feb 2010 14:46:23 +0000
Size: 3459
Url: http://www.omniorb-support.com/pipermail/omniorb-list/attachments/20100224/ec0a7c9c/attachment-0008.eml