[omniORB] multihomed host

[Guido.Pinza at sicap.com ()]

Hi.

I'm using omniORB 4.1.0 on a multihomed clustered environment
(solaris-10/sparc).

I've been trying to configure omniNames to use a specific address, of a
logical interface, for the naming contexts.

Until now I did not succeed; it seems omiNames uses always the first
address on the system (the same shown by ifconfig -a).


BR

Guido



-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.omniorb-support.com/pipermail/omniorb-list/attachments/20080304/bb22a25f/attachment.htm

[Vladislav Vrtunski]

You must use -ignoreport command line switch and then add suitable end
points, for example -ORBendPoint ::192.168.0.1:2809.

If you do not supply the port number, random available one will be
chosen, not the name service default 2809!

BR,

Vladislav Vrtunski

Post by Guido.Pinza at sicap.com ()
Hi.
I'm using omniORB 4.1.0 on a multihomed clustered environment
(solaris-10/sparc).
I've been trying to configure omniNames to use a specific address, of
a logical interface, for the naming contexts.
Until now I did not succeed; it seems omiNames uses always the first
address on the system (the same shown by ifconfig -a).
BR
Guido
------------------------------------------------------------------------
_______________________________________________
omniORB-list mailing list
http://www.omniorb-support.com/mailman/listinfo/omniorb-list

[Guido.Pinza at sicap.com ()]

Hi Vladislav.

Thanks a lot, it works !!!

BR

Guido



-----Original Message-----
From: omniorb-list-***@omniorb-support.com
[mailto:omniorb-list-***@omniorb-support.com] On Behalf Of Vladislav
Vrtunski
Sent: Tuesday, March 04, 2008 2:28 PM
To: omniorb-***@omniorb-support.com
Subject: Re: [omniORB] multihomed host

You must use -ignoreport command line switch and then add suitable end
points, for example -ORBendPoint ::192.168.0.1:2809.

If you do not supply the port number, random available one will be
chosen, not the name service default 2809!

BR,

Vladislav Vrtunski

Post by Guido.Pinza at sicap.com ()
Hi.
I'm using omniORB 4.1.0 on a multihomed clustered environment
(solaris-10/sparc).
I've been trying to configure omniNames to use a specific address, of
a logical interface, for the naming contexts.
Until now I did not succeed; it seems omiNames uses always the first
address on the system (the same shown by ifconfig -a).
BR
Guido
----------------------------------------------------------------------
--
_______________________________________________
omniORB-list mailing list
http://www.omniorb-support.com/mailman/listinfo/omniorb-list